Shop headings: New Spares | Used Spares | Accessories | Brands
Circlip used for retaining brake disc on Tonti framed models, used for gearbox applications on later bikes
More than 5 in stock
90271022 GU90271022 90 27 10 22
9027 1022 9027.1022 90.27.10.22
£0.90
INC VAT
£0.75 EX VAT
One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area.
See BRA99014 for high performance alternative
More than 5 in stock
£13.75
INC VAT
£11.46 EX VAT
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT
Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.
Caliper seal kit
2 in stock
£34.00
INC VAT
£28.33 EX VAT
Hex head brake disc bolt for front discs
Also known as Guzzi ref. 03611445. 6 bolts required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing
More than 5 in stock
AP8152286
£2.40
INC VAT
£2.00 EX VAT
Rubber bleed nipple cap with retaining ring
Suitable only for M8 and M10 bleed nipples
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT
Copper crush washer for brakeline connections, fits standard banjo bolt
Two M10 washers required per banjo bolt. Interchangeable with SIA10900
More than 5 in stock
25656100 GU25656100 25 65 61 00
2565 6100 2565.6100 25.65.61.00
£0.70
INC VAT
£0.58 EX VAT
M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor
4 in stock
98052475 GU98052475 98 05 24 75
9805 2475 9805.2475 98.05.24.75
£1.40
INC VAT
£1.17 EX VAT
Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders
Also known as Brembo ref. 110312720
4 in stock
19659500 GU19659500 19 65 95 00
1965 9500 1965.9500 19.65.95.00
£7.50
INC VAT
£6.25 EX VAT
Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs
This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820
Sorry, this part is no longer available.
14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00
Sorry this item is out of production